• banner-image

Tag Archives | R1 Concepts

Step-by-step Installation Guide for a Big Brake Kit

After purchasing a Big Brake Kit to increase the performance of your vehicle, your next step is to get it installed. It’s a similar process to the one you just went through above – remove the bolts, slide the caliper off the rotor, and remove or trim your dust shield as needed.

Comments are closed

The Best Brake Pad Shims For Your Driving Style

There are two main types of brake pad shims and deciding which one to get might be difficult, but that’s why this article exists. This is because compared to rubber shims, titanium shims do a better job of handling and minimizing the noise that your brakes might be making.

Comments are closed

What Causes Pulsating Brakes: A Guide to Common Issues & Fixes

Your brake system is responsible for the very tedious job of slowing down and stopping your vehicle. Conclusion When your brake pedals pulsate or vibrate, having your brakes checked becomes a necessary step in addressing the problem.

Comments are closed

How to Detect Bad Caliper Symptoms

Do you feel like something’s wrong with your brakes, but you can’t seem to point it out? Are you trying to diagnose your vehicle’s calipers, but you aren’t sure whether they’re the problem or not? Fear not, because listed below are some of the symptoms that you should be looking out for if your caliper’s […]

Comments are closed

The Rolls Royce Phantom and the Big Brake Kit: A Perfect Pairing

be/eJK5WkwF7N8 For decades, Rolls Royce has always been a brand name synonymous with quality. Enhancing Performance of the Rolls Royce Phantom For those unfamiliar, the Big Brake Kit was designed as an opportunity to supercharge any vehicle – both in terms of its visual style and with regard to its long-term performance.

Comments are closed

How to Bed Brakes to Improve Braking Power

If you’ve recently gone to the mechanic and heard the phrase, ‘bed your brakes’, and you’re wondering what it means, then you’ve come to the right article. You want to break these brakes in so that all the unnecessary materials get shaved or burnt off before you actually use the vehicle on the road.

Comments are closed